Secure panels (6,10) to bottom panel (11) using cam locks (D). Tighten cam locks (D) with a screwdriver.Attach panels (3,4) to bottom panel (11) using
Secure panels (3,4) to bottom panel (11) using cam locks (D). Tighten cam locks (D) with a screwdriver.Attach slat (2) to top panel (1) using dowels a
Attach slat (2) to top panel (1) using screws (H).Attach the top panel (1) to the assembly from the previous step using cam bolts and dowels as guides
4Secure top panel (1) to panels (3,6) using cam locks (D). Tighten cam locks (D) with a screwdriver.Secure top panel (1) to panels (4,5) using cam loc
Attach legs (13) to bottom panels (3,4) using bolts (J), spring washers (K) and washers (L) as guides. Screw support legs (12) into bottom panel (11)
Attach panel (16) to the back of the console using screws (F). Note the direction of panel (16) as shown above. Attach panel (17) to the back of the
Cover all visible cam locks with stickers (P) as desired.Insert shelf support pins (E) into panels (3,4,5,6).
Carefully place shelves (7,8) into the console. Note the direction of the shelves as shown in the diagram. Shelves will rest on the shelf support pi
Insert the doors into the console by pulling down the upper door pins and carefully placing the door wheels over the slide in the bottom panel. Secu
Handle back plate
Inset dowels (A) into slat (2). Screw cam bolts (C) into top panel (1). Insert dowels (A) and screw cam bolts (C) into bottom panel (11). Insert d
Insert dowels (A) and screw cam bolts (C) into panels (3,4).Insert dowels (B) into panel (9). Insert dowels (A) into panels (5,6,10). Screw cam bolt
Attach panel (10) to panel (9) using cam bolts and dowels as guides. Secure panel (10) to panel (9) using cam locks (D). Tighten cam locks (D) with a
Secure panel (5) to panel (9) using cam locks (D). Tighten cam locks (D) with a screwdriver.Secure panel (6) to panel (9) using cam locks (D). Tighten
Attach the assembly from the previous step to bottom panel (11) using cam bolts and dowels as guides.Secure panel (5) to bottom panel (11) using cam l
Comments to this Manuals