OOPPEERRAATTOORR''SS AANNDD PPAARRTTSS MMAANNUUAALL SINGLE STAGE SNOWBLOWER 5600-20 MODEL SERIAL NO. 2005130
SAFETY PRECAUTIONS - continued OM 0352SB-A 7MAINTENANCEALWAYS USE GENUINE PARTS WHEN REPLACEMENT PARTS ARE REQUIRED 1. Keep the tractor and snowblowe
SAFETY PRECAUTIONS OM 0352SB-A 8STORAGE Before storing the snowblower, certain precautions should be taken to protect it from deterioration. 1. Clean
DECALS OM 0352SB-A 9660263 657762 657761 660988 660263 661051
ASSEMBLY OM 0352SB-A 10SNOWBLOWER ASSEMBLY The snowblower is assembled at the factory, however, snowblower kits must be assembled. Use the present man
ASSEMBLY OM 0352SB-A 118. Figure 3: Install the pedal stopper (item 1), the bent portion facing the snowblower and secure in place with two 1/4"N
ASSEMBLY OM 0352SB-A 1216. Figure 5: Place the hand guard (item 2) inside the chute (item 1) and align the holes. Fasten with four 1/4"NC x 1/2
ASSEMBLY OM 0352SB-A 13Snowblower Installation on the Tractor 1. Remove the mower deck from the tractor if necessary. Refer to the appropriate Tracto
ASSEMBLAGE OM 0352SB-A 145. Figure 10: Lightly grease the tractor support arms (item 1). 6. Figure 10: Align the mounting tubes (item 2) with the tra
ASSEMBLY OM 0352SB-A 1513. Figure 12: Reinstall the gearbox shield (item 1) and the two serrated flange bolt 5/16"NC x 1/2" (item 2). Inst
OPERATION OM 0352SB-A 16 WARNING: Before operating the snowblower, become familiar with the location and function of all operator controls. Knowing
Foreword Thank you...for purchasing a Walker snowblower. Every effort has been made to provide you with the most
OPERATION OM 0352SB-A 17 CAUTION: If the auger strikes a solid object or the machine begins to vibrate abnormally, immediately disengage the PTO clu
OPERATION OM 0352SB-A 18ADJUSTMENTS ATTENTION : To avoid personal injury, be sure the tractor engine is off, the drive shaft disengaged, and all mov
OPERATION OM 0352SB-A 19 SNOW REMOVAL METHODS When removing snow, do not use the snowblower as a dozer blade to push snow. Let the snowblower work i
MAINTENANCE OM 0352SB-A 20Shearbolt Replacement 1. To replace the shearbolt, take off the gearbox shield by removing the two 5/16"NC x 1/2"
MAINTENANCE OM 0352SB-A 21Lubrication DESCRIPTION INTERVAL LUBRICATION REQUIRED 8 hours Grease each universal joint Driveline 24 hours Separate the
PARTS OM 0352SB-A 22 INTRODUCTION All parts are illustrated in "exploded views" which show the individual parts in their normal rela
PARTS OM 0352SB-A 23SNOWBLOWER ASSEMBLY
PARTS OM 0352SB-A 24SNOWBLOWER ASSEMBLY REF. DESCRIPTION QTY. PART #1 Snowblower housing and foot rest 1 667619 2 1 stage auger 1 667620 3 Cutt
PARTS OM 0352SB-A 25DRIVE SYSTEM REF. DESCRIPTION QTY. PART #1 Gear box 1 4500056 - Oil seal 2 662630 - Bearing 4 661728 - Plug 3/8" 1
PARTS OM 0352SB-A 26ROTATION SYSTEM REF. DESCRIPTION QTY. PART #1 Hand guard 1 667622 2 Handle support 1 667628 3 Chute stopper 1 667644 4 Handl
INTRODUCTION OM 0352SB-A 1INTRODUCTION – To the Purchaser ...
PARTS OM 0352SB-A 27CHUTE ASSEMBLY REF. DESCRIPTION QTY. PART #1 Chute 1 667646 2 Deflector 1 665738 3 Polyethylene de
TORQUE SPECIFICATION TABLE OM 0352SB-A 28 GENERAL SPECIFICATION TABLE Use the following torques when special torques are not given Note: These values
Printed in Canda
TABLE OF CONTENT OM 0352SB-A 1ADJUSTMENTS ...
TABLE OF CONTENT OM 0352SB-A 2 TO THE PURCHASER All products are designed to give safe, dependable service if they are operated and maintained accordi
SAFETY PRECAUTIONS OM 0352SB-A 3 SAFETY FIRST This symbol, the industry's "Safety Alert Symbol", is used throughout this manual and
SAFETY PRECAUTIONS - continued OM 0352SB-A 4NOTICE A safe operator is the best assurance against accidents. All operators, no matter how experienced
SAFETY PRECAUTIONS - continued OM 0352SB-A 5Snowblower Operation 1. Before leaving the tractor/snowblower unattended, take all possible precautions.
SAFETY PRECAUTIONS - continued OM 0352SB-A 6 23. Make sure the tractor is counterweighted as recommended by your dealer. Weights provide the necessar
Comments to this Manuals